Un blog de miniatures d'avions en métal à l'échelle 1/144.
En kit ou Diecast.
Avec des exceptions : un peu de plastique et de résine, des véhicules d'aéroport, et un porte-avions léger en construction aussi au 1/144...

A blog of metal aircraft miniatures at 1/144 scale.
Kit or Diecast.
With exceptions : some plastic and resin, airport vehicles, and a light aircraft carrier under construction also at 1/144...
Affichage des articles dont le libellé est # Australia. Afficher tous les articles
Affichage des articles dont le libellé est # Australia. Afficher tous les articles

mercredi 15 avril 2026

1/144 CAC CA-13 Boomerang

Au regard des difficultés d'approvisionnement d'avions militaires à partir de la Grande Bretagne pour assurer sa défense, l'Australie, par l'intermédiaire de l'entreprise CAC (Commonwealth Aircraft Corporation), a produit dans l'urgence l'avion de chasse Boomerang, conçu sur la base de l'avion d'entrainement Wirraway, lui même une émanation du North American T-6.

Handicapé par sa motorisation, le Boomerang n'a pas été un chasseur efficace mais a finalement trouvé sa place comme avion d'attaque au sol.

Même si on peut le considérer comme "secondaire", j'ai une certaine sympathie pour cet avion, sans doute à cause du boxart d'Airfix et qui présente son échappement ressemblant plus à un lance-flammes....


Faced with difficulties in sourcing military aircraft from Britain to safeguard its defence, Australia, through the Commonwealth Aircraft Corporation (CAC), urgently produced the Boomerang fighter aircraft, which was based on the Wirraway trainer, itself a derivative of the North American T-6.

Held back by its engine, the Boomerang was not an effective fighter but eventually found its niche as a ground-attack aircraft.

Even though it might be considered ‘secondary’, I have a certain fondness for this aircraft, no doubt because of the Airfix box art, which depicts its exhaust pipe looks like a flamethrower....


1/144 CAC CA13 Boomerang diecast metal aircraft miniature


Ce modèle a été coulé en métal sur la base d'un kit en résine de Kami de Koro Koro, dont la difficulté principale, comme souvent, tient à la verrière, trop grande....

Les décalques proviennent du fabricant australien Novascale et se posent sans problème, à condition de revernir en brillant la planche avant de les poser.

Et voici donc, après la série des biplans, un CAC Boomerang CA.13 en métal au 1/144.


This model was cast in metal based on a resin kit of the Kami de Koro Koro, the main difficulty with which, as is often the case, lies in the canopy, which is too large....

The decals are made by the Australian manufacturer Novascale and are easy to apply, provided you give the panel a gloss finish before applying them.

And so, following on from the biplane series, here is a 1/144 scale metal CAC Boomerang CA.13.


1/144 CAC CA13 Boomerang diecast metal aircraft miniature


1/144 CAC CA.13 Boomerang - 4 Squadron - Royal Australian Air Force

1/144 CAC CA13 Boomerang diecast metal aircraft miniature

1/144 CAC CA13 Boomerang diecast metal aircraft miniature

1/144 CAC CA13 Boomerang diecast metal aircraft miniature

1/144 CAC CA13 Boomerang diecast metal aircraft miniature

1/144 CAC CA13 Boomerang diecast metal aircraft miniature

1/144 CAC CA13 Boomerang diecast metal aircraft miniature

mercredi 9 avril 2025

1/144 Avro 707A

Contrairement à son nom, l'Avro 707A est le 3e prototype (le premier s'étant écrasé) d'une série d'avions à l'échelle 1/3 du Vulcan et destinés à tester le comportement à différentes vitesses des ailes delta sans empennage horizontal choisies pour ce bombardier. 

Après le crash du premier prototype, le 707B est construit avec un fuselage légèrement allongé, un train d’atterrissage avant plus haut, une flèche à 51° des ailes et un cockpit protégé par un carénage métallique.


Contrary to its name, the Avro 707A was the third prototype (the first having crashed) in a series of 1/3 scale Vulcan aircraft designed to test the performance at various speeds of the delta wings without horizontal tails chosen for this bomber.

After the crash of the first prototype, the 707B was built with a slightly lengthened fuselage, higher nose landing gear, a 51° wing sweep and a cockpit protected by a metal fairing.


1/144 Avro 707A diecast metal aircraft miniature


Après avoir constaté qu'avec l'augmentation de la vitesse, des turbulences empêchent une bonne alimentation des réacteurs par l’entrée d’air dorsale des 707 et 707B, un 3e prototype a été construit, le 707A avec des entrées d'air repositionnées à l'emplanture des ailes (puis plus tard modifié avec la forme des ailes finalement retenue pour les Vulcan, les "Kinked Wing").


After discovering that with increasing speed, turbulence prevented proper fueling of the engines through the dorsal air intakes of the 707 and 707B, a third prototype was built, the 707A, with air intakes repositioned at the wing roots (later modified to the wing shape ultimately adopted for the Vulcans, the "Kinked Wing").


1/144 Avro 707A diecast metal aircraft miniature


Le premier 707A WD280 (un second 707A ayant été construit, le WZ736) a effectué son premier vol en 1951 au Royal Aircraft Establishment (RAE) de Boscombe Down puis à l'issue de ses tests a été transporté en 1956 en Australie, pour être utilisé par l’Australian Aeronautical Research Council (AARC) jusqu’en 1967.

Il y a quelques années, j'ai donc acheté le 707A WD280 (version kinked wing) produit en kit par le fabricant 144th.co.uk (qui a également produit deux autres versions), puis après avoir réalisé un moule, je l'ai coulé en métal.

Le montage s'est déroulé sans difficultés, et j'ai choisi finalement la livrée portée par cet avion lorsqu'il était à l’Australian Aeronautical Research Council (AARC).


The first 707A WD280 (a second 707A having been built, as WZ736) made its first flight in 1951 at the Royal Aircraft Establishment (RAE) at Boscombe Down and after its tests was transported in 1956 to Australia, to be used by the Australian Aeronautical Research Council (AARC) until 1967.

So, a few years ago, I purchased the 707A WD280 (kinked wing version) produced as a kit from the manufacturer 144th.co.uk (which also produced two other versions), and after making a mold, I cast it in metal.

The assembly went smoothly, and I ultimately chose the livery worn by this aircraft when it was at the Australian Aeronautical Research Council (AARC).


1/144 Avro 707A diecast metal aircraft miniature


1/144 Avro 707A - Australian Aeronautical Research Council (AARC)

1/144 Avro 707A diecast metal aircraft miniature

1/144 Avro 707A diecast metal aircraft miniature

1/144 Avro 707A diecast metal aircraft miniature

1/144 Avro 707A diecast metal aircraft miniature

1/144 Avro 707A diecast metal aircraft miniature

1/144 Avro 707A diecast metal aircraft miniature

1/144 Avro 707A diecast metal aircraft miniature

mardi 18 décembre 2018

1/144 Bristol F2B Fighter

Je renoue avec mes débuts, les kits d'avions de la première guerre mondiale.
Voici un modèle de Bristol F2B au 1/144, mélange des kits Skytrex (Red Eagle) et Reviresco.
Il a nécessité pas mal de travail car le fuselage, au niveau de la partie moteur, n'était absolument pas conforme, et il a fallu pas mal de mastic pour compenser....

I go back to my beginnings, the kits of planes of the first world war.
Here is a model of Bristol F2B 1/144, a mixture of kits Skytrex (Red Eagle) and Reviresco.
It took a lot of work because the fuselage, at the engine part, was absolutely not compliant, and it took a lot of putty to compensate....

1/144 Bristol F2B Fighter diecast metal aircraft miniature

1/144 Bristol F2B Fighter diecast metal aircraft miniature

1/144 Bristol F2B Fighter diecast metal aircraft miniature

Ce modèle commencé il y a bien longtemps, est décoré aux couleurs de l'Australian Air Corps, en Palestine, pendant la première guerre mondiale.

This model started a long time ago, is decorated in the colors of the Australian Flying Corps, in Palestine, during the first World War.

1/144 Bristol F2B Fighter diecast metal aircraft miniature

1/144 Bristol F2B Fighter - 1st Australian Flying Corps

1/144 Bristol F2B Fighter diecast metal aircraft miniature

1/144 Bristol F2B Fighter diecast metal aircraft miniature

1/144 Bristol F2B Fighter diecast metal aircraft miniature

1/144 Bristol F2B Fighter diecast metal aircraft miniature

1/144 Bristol F2B Fighter diecast metal aircraft miniature

1/144 Bristol F2B Fighter diecast metal aircraft miniature


VOIR AUSSI / TO SEE ALSO
Bristol F2B Fighter



dimanche 16 février 2014

1/144 North American F-86 Sabre

Le petit dernier réalisé à partir d'un modèle de MiniClassic, entièrement repeint et redécoré avec les décalques de Southern Sky Models (disponible sur Ebay) aux couleurs d'un avion de la RAAF, qui a fait partie un temps de la Royal Malayan Air Force.


The last one made ​​from a MiniClassic model, repainted and redecorated with Southern Sky Models decals (available on Ebay) in the colors of an aircraft of the RAAF, who was for a time part of the Royal Malayan Air Force.


1/144 North American F-86 Sabre Australia diecast metal aircraft miniature

1/144 North American (CAC) F-86 Sabre - 75 Squadron - Royal Australian Air Force

1/144 North American F-86 Sabre Australia diecast metal aircraft miniature

1/144 North American F-86 Sabre Australia diecast metal aircraft miniature

1/144 North American F-86 Sabre Australia diecast metal aircraft miniature

1/144 North American F-86 Sabre Australia diecast metal aircraft miniature

1/144 North American F-86 Sabre Australia diecast metal aircraft miniature

1/144 North American F-86 Sabre Australia diecast metal aircraft miniature


mardi 3 décembre 2013

1/144 Dassault Mirage IIIO

Un avion emblématique de son époque, le Dassault Mirage III, réalisé par M. Chaubet au 1/144, que j'ai décoré aux couleurs de la RAAF avec les décalques Novascale.

An iconic aircraft of its time, the Dassault Mirage III, made by Mr. Chaubet at 1/144, I decorated in the RAAF colors with Novascale decals.


1/144 Dassault Mirage IIIO - 75 Squadron - Royal Australian Air Force





mercredi 23 octobre 2013

1/144 General Dynamics F-111 Aardvark

Oui, encore un F-111.
J'avais trouvé le modèle d'Amercom tellement réussi, que j'ai décidé d'en faire un second aux couleurs de l'autre utilisateur de ce type d'avion : l'Australie.
Je l'ai donc entièrement repeint et redécoré avec les décalques de Novascale.
Pour le modèle choisi, je n'ai pas pu résister à celui-là pour vanter le mérite de son pilote....

Yes, another F-111.
I found the Amercom model so successful, that I decided to make a second in the colors to the other user of this type of aircraft : Australia.
So I repainted it and redecorated with Novascale decals.
For the selected model, I could not resist to that one to praise the merits of his pilot....


1/144 General Dynamics F-111 Aardvark - 1st Squadron - Royal Australian Air Force





mercredi 17 juillet 2013

1/144 De Havilland Mosquito FB.VI - by Diverse Images

Encore une "wooden wonder" (merveille en bois) avec ce De Havilland Mosquito du 464 (RAAF) Squadron, réalisé par Diverse Images au 1/144, qui a participé à l'Opération Jericho, le bombardement de précision de la prison d'Amiens, pour permettre aux résistants emprisonnés de s'évader.

Another "wooden wonder" with this De Havilland Mosquito of 464 (RAAF) Squadron, made by Diverse Images at 1/144, who participated at the Operation Jericho, the precision bombing of Amiens jail to allow imprisoned resistants to escape.


1/144 De Havilland Mosquito FB Mk.VI - 464 (RAAF) Squadron - Royal Air Force